Command device pressure control valve

[Standard technical parameter]

Body type: through / three pass casting spherical valve

Nominal diameter: DN20-DN150

Rated pressure: PN16

Connection: flange: FF, RF, RJ and other threads: DIN, NPT, RC, BSP, G and other welding: GB12224-89

Form of sealing surface: PN16 convex surface

Material: WCB, WCC, WC6, 304, 316, 304L, 316L

Upper valve cover: standard type (-5 ~ +70℃)

High temperature type without condenser (＜200℃)

Gland type: press plate type

Packing: V PVC, PTFE flexible graphite fluoride

[Valve structure drawing]

[Valve assembly]

Spool form: single seat plunger type, metal seal, soft seal, quick opening characteristics

Spool material: 304, PTFE

[Actuating mechanism]

Form: film type

Diaphragm material: NBR clamp to strengthen polyester fabric

Signal interface: internal thread M16×1.5

[Command device]

Form: film type

Diaphragm material: NBR clamp to strengthen polyester fabric

Signal interface: internal thread M16× 1.5

[Ｐarameter]

Rating KV: refer to table

Flow characteristic: quick opening

Mode of action: after valve pressure control

Pressure adjustment range: refer to table

Pressure control accuracy: ±2.5%

Leakage level: metal seal: less than 0.01 (ANSI, B16.104-1976IV)

Soft seal: less than 0.00001%

[Valve features]
      Pilot operated pressure control valve (single seat valve, referred to as n) of the valve without any external energy, the use of adjusted medium (gas) energy as the power source, the detection of actuator into the command device, to control the position of the valve core valve, changing the medium flow through the valve, the valve the pressure is maintained at a constant value. The characteristic of the valve is that the pressure setting value can be realized on the command device, and can be adjusted freely during operation. The utility model is convenient, quick and labor-saving, and the control accuracy is about twice as high as that of the general regulating valve.

[Adaptive condition]
       Widely used in petroleum, chemical industry, gas equipment, nuclear power equipment, water treatment, air conditioning, iron and steel metallurgy, industrial furnace, filling equipment, brewing equipment, drying equipment, vacuum equipment, surface treatment, bio pharmaceutical, food machinery, textile, papermaking and other industries, the preferred product is construction of national defense construction, science and technology the.